22 kW (about 30 hp) compressor is one of the most common models in the industry that is used to produce medium capacity compressed air (usually between 3,000 and 3600 liters per minute depending on the work pressure of 7 to 10 times). These types of compressors are often used in workshops and small to medium industries and are popular because of their high performance and 24 -hour continuous work
Technical specifications of 22 kW Screw Compressor:
Motor power (Power):
22 kW (equivalent to about 30 hp).
are usually used with three -phase electromotors (380V, 50 Hz).
AIR (AIR DELIVERY):
Depending on Working Pressure:
at pressure 7 times: about 3.6 to 4.0 cubic meters per minute (3600 to 4000 liters per minute).
at pressure 10 times: about 3.2 to 3.6 cubic meters per minute (3200 to 3600 liters per minute).
at pressure 13 times: about 2.8 to 3.2 cubic meters per minute (2800 to 3200 liters per minute).
These values depend on the Air End design, such as the EVO6 or similar rotor air conditioner.
Working Pressure (Operating Pressure):
usually between 7 and 13 times (adjustable by required).
The maximum pressure in some models reaches 15 times.
The Air Force Unit (AIR END):
are often used by reputable brands such as Rotorcomp (EVO6), Aerzen, or GHH.
Oil type or oil-free depending on the model.
Cooling System:
cool air (air-cooled) or cool water (water-cooled).
3 -phase aluminum radiator to reduce temperature (operating temperature is usually kept below 50 ° C).
Oil volume (Oil Capacity):
about 15 to 20 liters (depending on the design of the septor tank).
Suggested Oil: VDL or Corona oil for compressor.
Sound level (Noise Level):
between 65 and 75 dB (depending on the insulation and cabinet design).
compared to very low piston compressors.
Dimensions and Weight (Dimensions & Weight):
Approximate Dimensions: 1000 x 900 x 1000 mm (length 1 height).
Weight: about 400 to 600 kg (depending on the material and additional equipment such as inverter).
Power System (Drive System):
Belt-Driven or Direct-Driven.
Engine Round: Usually 2900 to 3000 rpm.
Power Panel and Control (Control System):
Equipped with smart PLC (eg, butter or dotech).
Auto Troubleshooting and Pressure Set.
Power Consumption (Power Consumption):
about 24 to 26 kWh at full load (Full Load).
with inverter (if installed) is optimized.
Other features:
External September filter for easy replacement.
Seismic to reduce ground Ash.
Continuous functionality (7/7) in industrial conditions.
